Fluorite Ore Flotation Cell Flotation Machine For Minerals,Ferrous Metal
Introduction of Flotation Machine:
Flotation Machine can be used to separate non-ferrous metal, ferrous metal, noble metal, non-metallic mine, chemial material. It can be used in roughing, scavenging, selection or reverse flotation. In the flotation process, after being mixed with drug, some qualified mineral attaches on bubble, floats on the surface of slurry and is scraped out, other mineral still stays in the slurry, so the separating purpose is finished.
Working Principle of Flotation Machine
The impellers are driven through V belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board. Each chute can inhale gas, sink magma, separate. No assisting equipment are required, and it must be levelly installed.
Features of Flotation Machine
1. Large inhaling capacity and low energy consumption;
2. Complete flotation circuit with inhaling air and pulp, no auxiliaries are needed;
3. Process is easy to be changed;
4. Reasonable circulation of pulp decreases coarse sand sedimentation;
5. Automatic controlling device makes adjustment more convenient.
Technical Parameters:
SF series Flotation Machine
| Model | Cell volume(m³) | Impeller diameter (mm) | Impeller speed (r/min) | Capacity (m³/min) | Main motor power (kW) | Scraper motor power (kW) | Weight (t/cell) |
| SF0.7 | 0.7 | 350 | 400 | 0.3-1 | 3 | 1.1 | 0.9 |
Product Picture Show:
Product Tags:
|
|
Ferrous Metal Ore Processing Plant / Minerals Cell Flotation Mineral Processing Images
|
